Bosch BPT-S 3 Instrucciones De Servicio página 158

40 | Transportation and installation
CAUTION
CAUTION
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Risk of injury due to incorrect mounting/
disassembly
Incorrect mounting/disassembly can cause injury
during commissioning/recommissioning.
Only install the device with the wall-mounting frame

supplied
Do not install the device on a damp wall: Do not

allow rust to form on screws
The device must not be tipped over or subjected to

heavy impact
Do not over-tighten the screws in the wall-mounting

frame, because overtightened screws can become
loose
Insert the device correctly in the wall-mounting

frame. Do not forcefully press down on an
incorrectly inserted device
The installation location must be easily and safely

accessed
Risk of injury due to an unsuitable installation
location
If the installation location is unsuitable, this may
cause injury.
Use only suitably fireproofed surfaces for

installation (made from flame-retardant material),
as metal surfaces on the back of the device (e.g.
heat sink) may heat up to 100 °C.
Only install the device in installation locations

where it is not possible for children or unauthorised
persons to pull on the cables.
English
Bosch Power Tec GmbH