Idiomas disponibles
Idiomas disponibles
GARAGE INFLATOR
Air hose and universal adaptor valve
The inflator is supplied with an air hose and a universal
connector valve that is firmly connected to the end of
the hose. To simply use the adaptor, push down the
open adaptor with the lever in a vertical position onto the
threaded part of the valve on the rim. To secure it in place,
push the lever down and leave it in a horizontal position If
you want to use any of the accessories included with the
product, slide the adaptor down onto the accessory while
holding the lever in a vertical position, secure onto the
valve and push the lever down into a horizontal position.
Inflating accessories
The GARAGE INFLATOR inflator comes with three inflating
accessories (a needle nozzle for balls and two adaptors
(red / blue) for other inflatables).
1. Fine nozzle: universal inflating accessory for lilos and
beach balls.
2. Wide nozzle: when a larger air flow is required or simply
as an accessory for compressed air cleaning..
3. Needle nozzle: for balls used in sport (football, basketball,
volleyball).
ON / OFF button
Use the ON / OFF button to switch the inflator on or off.
Connection
The product must be plugged in correctly. Improper
connection may lead to electric shocks.
1. This product must be correctly connected to prevent
electrical short circuits. In the event of an electrical short
circuit, an earthing connection reduces the risk of electric
shocks by providing an escape route for the electric
current. This product is fitted with a suitable power cord
and plug according to applicable regulations.
2. If the power cord or plug needs to be repaired, do not
connect the inflator under any circumstances.
3. Only a qualified electrician or the technical assistance
service can service the plug. If it does not fit into the
socket, check the installation with a qualified electrician.
42
