Idiomas disponibles
Idiomas disponibles
Please note that pedals on any wheeled toy without freewheeling appliance will turn even
if the product is being pushed or is coasting.
If this product can be adjusted please adapt it to your child's height.
Do not transport anything on this product.
Never use corrosive or abrasive substances to clean the toy. Never use substances
which may cause pollution of the environment.
Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of
oil every two or three months.
For models with pneumatic tyres: When leaving wheeled toys with pneumatic tyres on
floors containing solvents or which have been glued with such solvents (e.g. PVC) they
may possibly stain it due to a chemical reaction with the natural product caoutchouc. If
in doubt place something underneath the wheels. Ensure that air pressure in the tyres is
correct (1,5 bar/20 PSI); if air pressure is too low this increases wear, and makes riding
the toy more difficult!
Assembly of the wheeled toy
The wheeled toy vehicle must be assembled carefully by an adult person. Study the
assembly instructions carefully before beginning work. Assemble the vehicle in the exact
sequence shown by the letters in the diagrams. This is essential for the safe function and
use of the toy vehicle.
Please note that there is always a danger of injury when working with tools or doing
manual work. Therefore please be careful when assembling this machine.
Ensure that your working area is free of possible sources of danger, for example don't leave
any tools lying around. Always dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if children play with plastic bags!
Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then check that all screw con-
nections have been tightened firmly. Attention: once locknuts have been unscrewed they
no longer function correctly (the locking device is destroyed), and must be replaced.
Please keep original packaging of this article, so that it may be used for transport
at a later date, if necessary.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
When ordering spare parts, always state the full article number, spare-partnumber, the
quantity required and the inspection number stamped on the back.
Example order: Art. no. 08876-000 / spare-part no. 13100000 / 1 piece / inspetion no.
Important: spare part prices do not include fastening material; if fastening material (bolts,
nuts, washers etc.) is required, this schould be clearly stated on the order by adding the
words „with fastening material".
KETTLER (GB) Ltd. · KETTLER House, Merse Road · North Moons Moat · Redditch,
Worcestershire · B 98 9 HL · Great Britain
6
