WARNING:
Start Using Your Cooker Hood
S lide control
This control system consists of two parts, power panel and touch panel.
Touch panel contains five function buttons (power, speed, light, timer, slide control)
Timer
Light
Functional Operation
1. Power on, the hood will standby with backlight, backlight will be extinguished after 5
seconds without any operation, for using the hood again, touch any key to wake up it's
standby motion.
2. Touch the power button
at the first speed. Touch the power button
downwards, and stop working. If you stop the hood, without stopping the motor, when
you open the hood again, the hood will work at the speed it works last time.
2.1 Press the power button
downwards, the hood will stop moving, with motor keeping running. Press the power
button
again, the hood will move again.
3. Motor on/off and speed setting:
3.1 Touch the speed button
3.2 How to set the speed? Touch this area
finger sliding on it. When your finger stops at the first or second point, the motor will
run at the lowest speed; when your finger stops at the third or fourth point, the motor
will run at the second speed; when your finger stops at the fifth or sixth point, the
motor will run at the third speed; when your finger stops at the seventh or eighth point,
the motor will run at the highest speed.
4. Lighting:
4.1. After the hood slides up, the lights will turn on automatically in 8-10 seconds.
For safety reason, please use only the same size of fixing
or mounting screws which are recommended in this
instruction manual.
Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
Slide control
for 2 seconds, the hood will slide upwards, and works
, when the hood is coming upwards or going
, the motor will turn on; touch it again, it will turn off.
19
Speed
Power
for 2 seconds again, the hood will slide
, with your