160 | Drystar 5500, Drystar 5503 | Manual de instalación Plug and Play
8
Monte la correa del tambor
1
1. Tome la correa del tambor de la caja de accesorios.
8
1
2
2. Abra la puerta del compartimento del tambor.
3
2
3
3. Empuje el tensor de la correa del tambor hacia abajo y reténgalo.
4
5
4
4. Monte la correa plana del tambor con el texto hacia arriba en la parte
interior. Suelte lentamente el tensor de la correa.
5
2903S EN 20121207
2903S EN 20121207
2901J ES 20220908 1526
Mount Drum belt
Take drum belt from accessories box.
Mount Drum belt
Take drum belt from accessories box.
Open drum compartment door.
Push drum belt tensioner down and
hold it.
Open drum compartment door.
Push drum belt tensioner down and
hold it.
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
Close drum compartment door.
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
Close drum compartment door.
If the printer is not used for a long time
(at least 4 weeks),
it is recommended to remove the belt.
B
B
0
0
2
Open drum compartment door.
2
Open drum compartment door.
4
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
4
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
If the printer is not used for a long time
(at least 4 weeks),
it is recommended to remove the belt.
If the printer is not used for a long time
(at least 4 weeks),
it is recommended to remove the belt.
0
0
11/
