Idiomas disponibles
Idiomas disponibles
Pairing
1. Make sure your Bluetooth headphones are close to the
BoomBoom 55 HD. The best distance is about 1 metre.
2. Put your Bluetooth headphones in pairing mode (please refer
to your headphones' user manual).
3. Set the BoomBoom 55 HD's switch (2) to ON.
4. Long press the pairing button (3) until the LED will start to
quickly flash blue.
5. The BoomBoom 55 HD will now be automatically paired with
your headphones. Once the pairing has been established, the
LED on the BoomBoom 55 will light up continuously (this may
take a while) in the color of the Codec connection.
Codec connection
When the BoomBoom 55 HD is paired, the LED color indicates
the used codec. By short pushing the pairing button, you can
select another codec supported by your connected device.
Pairing a second Bluetooth device
With the BoomBoom 55 HD, you can pair two Bluetooth
receivers at the same time.
After pairing the first Bluetooth device, select the Codec you
want to use. (must be supported by your second receiver)
Put the second device in pairing mode.
Long press the BoomBoom 55 HD's pairing button until the LED
will start to quickly flash blue.
