Worx WX025 Manual Original página 8

2. COMPONENT LIST
1. LED LIGHT
2. HOOK
3. ROTATING HEAD
4. ON/OFF SWITCH
5. LANYARD
6. 20V BATTERY PACK*
* Not all the accessories illustrated or
describedare included in standard delivery.
3. TECHNICAL DATA
Rated voltage
High Brightness
Burntime
(2.0Ah)
Low Brightness
8
Brightness
Pivoting head
Machine weight
( bare tool)
* * X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Choose
the type according to the work you intend to
undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
20V Cordless Jobsite Light
WX025
WX025.X**
20V Max***
14 hrs
17 hrs
160/350 LM
-6°~+90°
0.26kg
Type Capacity
WA3551 2.0Ah
WA3880 2.0A
4. OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ACTION
BEFORE OPERATION
Charging the battery pack
Installing/Removing the battery pack
OPERATION
Press the ON/OFF switch to turn the light
on and off.
WARNING: Do not direct the light
beam into eyes.
Carrying or Hanging the Portable
Light
Utilize the hook to hang the light for
illumination.
Warning! Do not hang the Work
light on any electrical power cord!
WARNING! The hook is only used
to lift the light and is not intended
to bear any additional weight or
support your weight in any situation
Rotate the head of the light within the
range of -6° to 90°.
5. MAINTENANCE
Your tool requires no additional lubrication or
maintenance. There are no user serviceable parts in
your tool. Never use water or chemical cleaners to
clean your tool. Wipe clean with a dry cloth. Always
store your tool in a dry place.
6. CLEANING
Use a dry clean cloth wipe the light and make sure
not to use water or immerse the light into water for
cleaning.
WARNING: Never use solvents or other harsh
chemicals to clean the light. Never let any liquid
slide into the light.
FIGURE
See Fig.A
SeeFig.B,C
See Fig.D1
See Fig.D2
See Fig.E
EN