Installation Dimensions - PITT Akan Manual Del Usuario

Content
Chapter Subject
1

Installation dimensions

2 Connection: gas and electrical
3 General instructions
4 Control PITT cooking
®
5 Optimal use of the PITT ® cooking system
6 Maintenance of the PITT ® cooking system
7 Failures in the PITT ® cooking system
8 Models overview Top Side
9 Models overview Front Side
10 Packaging
11 Service addresses
Foreword
Dear customer,
Congratulations on the purchase of your PITT ®
determine the location of each burner which means you are guaranteed to cook with pleasure for many years. Thanks to
the various burner capacities you can properly prepare each dish and the integrated spark ignition in the controls ensures
that the burners can be handled with one hand. This manual describes how to take full advantage of all the features of
this gas hob.
We recommend you read the user manual and mounting instructions carefully before you use the gas hob.
Do not throw this manual away, so that any following user also benefits from it.
EN
Happy Cooking!
PITT ® cooking
Page
15
16
17
18
18
19
20
21
23
24
76
cooking gas hob. This unique system gives you the opportunity to
14
1 Installation dimensions
Top Side (TS) measure in mm
Min.
Min. 47
150
Min. 600
Min. 50
fig. 1
Front Side (FS) measure in mm
Min.
Min. 47
150
Min. 650
75 mm
fig. 3
• A cooking module cannot be installed over a partition of cabinets. It has to be accessible in case it needs servicing.
• When PITT ® cooking is combined with a drawer cabinet, always be aware of the measurements of the unit and the support
bar. The height of the unit and the support bar is 115 mm (Top Side) and 170 mm (Front Side) measured from the top of
the worktop (fig.2).
• To prevent bending of the worktop the appliance need to be supported by two PITT
(fig. 2 and 4).
Min.
650 Min.
450
Min. 4
Max. 35
115mm TS
Support Bar
170 mm FS
fig. 2
afb. 2
Support bar
Min. 4
Max. 25
Support bar fig. 4
® cooking support bars
Type sticker
15
88mm TS
140 mm FS
EN