Getac F110 Serie Guia De Funcionamiento página 3

Getting Started
Unpacking
For standard models only:
F110 Tablet PC
AC adapter AC power cord
Battery pack x 2 Stylus
Tether
Document(s) Driver disc (optional)
Installing the SIM Card (Optional)
and Battery Packs
1. Slide the two small locks outward to the
unlocked position (
release the latch ( ) (
battery cover.
2. Select models only: With the SIM card's
chip side facing up and the beveled corner
pointing to the slot, insert the card all the
way into the slot.
3. Note the orientation of the battery pack.
Hold the battery pack at an angle and
insert its small tabs to the corresponding
notches in the battery compartment.
Then, lift the yellow protection sheet in
the battery compartment and plug the
battery connector.

) ( ) and then

) to open the
4. Proceed with the other battery pack.
5. Hold the battery cover at an angle and
insert the cover's small tabs to the corre-
sponding notches on the Tablet PC; then
close the cover. Press the four small dots

( ) so that the cover clicks into place.
Engage the cover latch (
the two small locks inward to the locked

position ( ) ( ).
Connecting to AC Power and
Starting Up
You must use AC power when starting up
the Tablet PC for the very first time.
1. Connect the AC adapter as shown below.
2. Press the power button (
3. The operating system, Windows, should
start.
When turning on your computer for the
very first time, you will be guided through
a setup process. Follow the onscreen
instructions to complete.

) ( ) and slide
) to start up.
1