Idiomas disponibles
Idiomas disponibles
MANHATTAN 10A / MANHATTAN 12A / MANHATTAN 15A
PRO
11. Power input via powerCON Type A connector (supplied).
12. Cascade power output, using powerCON Type B, use a Cable with powerCOM type B
terminal to powerCOM type A connector, to power another unit.
13. T6.3AL fuse, 250 V.
14. Power Switch: Turns the system on and off. Make sure the system volume control is at
minimum when turning on the system.
Make sure ALL of your equipment is completely OFF and turn down ALL VOLUME, LEVEL
AND GAIN controls before connecting the speaker.
CONNECTIONS
1. For this unit you can connect a mixer or other audio signal sources directly to your
speaker. Use an XLR or 1/4" jack connector to connect to the signal input (3).
2. You can send audio signal to other Manhattan units or amplifiers using the XLR output
connector (Fig4)
INSTALLATION AND CONFIGURATION OF AUDIBAXNET
* Software installation instructions at the end of the manual.
1. AudibaxNet home page
AudibaxNet®
The home screen is the first screen that appears after starting the AudibaxNet software.
Access main menu/System information/Load and save/Quick scan/Sound test.
Also 5 quick access functions:
- Zoom +: to maximize the blocks on the main menu page.
- Zoom -: To minimize blocks on the main menu page.
- Input Level: Press this button to get a quick view of the input level on all speaker blocks.
- Output Level: Press this button to get a quick view of the output level on all speaker
blocks.
- Temperature Level: Press this button to get a quick view of the amplifier temperature
level across all speaker blocks.
www.audibax.com
4
