Idiomas disponibles
Idiomas disponibles
I
Installation instructions
Tip: Before each use, it must be sterilized beforehand with breast milk that comes into direct contact with
the components: bottle, silicone horn, three-way silicone cylinder, duckbill valve.
Bottle cap, and so on
1. Place the silicone horn and bell mouth in
sequence, then place the dust cover.
3
3. Place the cylinder and cylinder head into
three-ways and tighten the cylinder head.
5. Screw the three-ways assembly
onto the bottle.
Note: The pass-through assembly must be opened before insertion into the main airway hole; Do not start the main motor work
without opening the dust cover, otherwise, it will affect the main motor's service life.
2. Insert the set of silicone horn and bell mouth
into the three-ways to ensure the sleeve is tight.
(Note: when removing, one hand holds the three-ways, the other
hand holds the bell mouth assembly upwards and gently pulls
out).
m
4. Place the duckbill valve on the lower
outlet of the three-ways valve to ensure no
leaks.
6
6. Insert the direct hose assembly into the cylinder
head and the relative position of the main motor
hole to ensure no air leaks and it can be used.
21
