camry CR 6515 Manual De Uso página 6

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
6.Never operate the appliance with wet hands.
7.When you suspect that the appliance has been damaged NEVER try to repair it on
yourself.
8Do not wash the appliance under running water or so that water could penetrate it.
IV. BEFORE FIRST USE
1. Remove the packing elements and align the power cord
V. DESCRIPTION
1. Induction heating zone
4. Display and indicator lamps
USE
Insert the plug into a mains socket. You will hear a sound signal. The appliance will remain in the standby mode.
Place an appropriate cooking utensil on the plate. Press the ON/ OFF switch and turn on the induction cooker. The display will show
"ON" and you will hear a sound signal. Select the cooking mode using the FUNCTION button.
The cooker offers 4 operating modes:
1. Continuous operation at a specific heating power. The W indicator lamp will turn on and the heating power will be shown on the
display. Use the knob (with positions for every 200W) to adjust the heating power within the range of 200W to 2000W.
2. Operation with the timer at a specific heating power. The W indicator lamp will turn on and the operation time will be shown on the
display. Set the desired time using the knob. After a moment, the heating power will be shown on the display. Use the knob (with
positions for every 200W) to adjust the heating power within the range of 200W to2000W.
3. Continuous operation at a specified temperature. The C indicator lamp will turn on and the set temperature will be shown on the
display. Use the knob to adjust the temperature within the range of 60 to 240 degrees Celsius.
4. Operation with the timer at a specific temperature. The C indicator lamp will turn on and the operating time will be shown on the
display. Set the desired time using the knob. After a moment, the temperature will be shown on the display. Use the knob to adjust
the temperature within the range of 60 to 240 degrees Celsius.
INDUCTION COOKER SAFETY LOCK
If there is no pot or frying pan on the induction heating plate or the plate has been removed, the cooker will shut off and show error E0.
If the diameter of the pot or frying pat is too small, the cooker will shut off and show error E0.
If the temperature of the induction heating plate is too high, the cooker will shut off and show error E5.
When the cooker is connected to an inappropriate power supply, it will show error E4 (power too low) or E3 (power too high).
In the case of other errors, please contact our customer service.
VI. CLEANING AND MAINTENANCE
Washing the appliance after each use is recommended. Disconnect the appliance from the mains socket and wait until it cools down.
Do not use petrol, solvents, brushes or pastes to clean the induction heating plate.
Wipe the appliance with a damp cloth with some dishwashing liquid. Use a vacuum cleaner to remove dirt from the air supply and fan
grilles. Clean the ceramic surface and the control panel with a soft damp cloth and gentle cleaners for ceramic surfaces.
Make sure that water does not drip on the cooker, as this can cause damage. Never immerse the appliance or the cable in water.
Technical data:
Power: 2000W
Power supply: 220-240V~ 50/60Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding
waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components,
which may effect the environment. Do not dispose this appliance in the common waste bin.
Attention! Hot Surface" – Temperature of accessible surfaces can be higher when the appliance is operating, which
BE CAREFUL!!!
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM
WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER
Sehr geehrter Kunde
Vielen Dank, dass Sie sich für CAMRY-Produkte entschieden haben.
.
2. FUNCTION button
5. ON/OFF switch
means that the housing parts become much hotter when the appliance is in use.
DEUTSCH
BENUTZUNG BEWAHREN SIE
3. Knob
6
loading