Idiomas disponibles
Idiomas disponibles
extinguish.
2.Handheld vacuum cleaner can be connected to different
accessories like upholstery tool, crevice tool to clean
different places. (Fig 12)
Aim the accessory to handheld vacuum mouth and push
upward until a "click" sound is heard. Push the button on
accessory to remove accessory from vacuum cleaner.
Note:
1.Other accessories like pet brush or stretch hose can
also be bought from JIMMY local distributor if needed.
2.When the battery level is lower than 20%, the machine
switches to the floor mode automatically.
3.Do not use handheld vacuum cleaner and carpet brush
to pick up liquid.
Product charging
Connect power cord to power socket, put stick vaccum
cleaner to charging base to start charging.
Note:
1.Fully charge battery pack before first use. Empty battery
power before second charge to ensure life of battery
pack.
2. If the product is to be long idled, please charge it
once every three months. (Please only use power cord
supplied with the unit)
3. When not charging, please remove the charging base
power cord from power socket to prevent the danger of
accidental touching.
4.If need to charge the battery separately, applicable charger can be bought from
JIMMY distributor.
Hot drying function
Under charging mode, press mode button to enter hot dry mode. Hot air will dry
entire air path including burshroll, dust cup and dirty water tank for about 0.5 hour
and then only dry brushroll for another 2.5 hours. In the first 0.5 hour full air path
drying, vacuum motor will work to send hot air through the full air path. (Fig 13, Fig 14-1)
To stop drying air path and only keep brushroll drying for silent drying mode, press on/off button, vacuum
motor will not work in this mode.
To turn on and turn off hot air drying function, press mode button.
Note: This function is to prevent humid brushroll to breed bacteria or reduce odor.
Brushroll and air path self cleaning function
Under charging mode, press self cleaning button to enter self cleaning mode (Fig 13). After self cleaning,
product automatically enters brushroll hot drying mode. During self cleaning, if need to complete self cleaning
in advance, press on/off button or mode button. And product will go back to charging mode and fan will turn
off after 3 minutes. (Fig 14)
Note:
1.Before start self cleaning, please drain the dirty water tank and make sure product is placed on charging
base, power cord is connected to power socket and charging base, and there is at least 50% water in clean
8
Button
Upholstery
tool
12-1
On/off
button
Mode
button
13
Hot drying mode
14-1
Button
Crevice
tool
12-2
Self-cleaning button
Self cleaning mode
14-2
Charging mode
14-3
