Idiomas disponibles
Idiomas disponibles
USE
System requirements
This external hard drive is compatible with Microsoft Windows 8 and higher and Mac OS 10.x and higher
operating systems.
For USB 3.2 Gen 1x1 operation, a USB 3.2 Gen 1x1 interface is required. The hard drive is backwards com-
patible with previous USB standards.
The hardware configuration of your PC and the operating system used may influence the accessibility of the
external hard drive and the transfer speed between the PC and external hard drive.
Power supply using USB 2.0: If your USB 3.x hard drive is not recognised on a computer with a USB 2.0
port, the power supply may be a possible cause. In this case, please connect a USB hub with an external
power supply.
*Trademarks: Windows is a registered trademark of Microsoft Corporation. MAC and macOS are registered
trademarks of Apple Inc. All brands and third party names are the property of the respective user.
Connecting the external hard drive
To connect the external hard drive to your computer, please use only the supplied USB-A to USB Mi-
cro-B cable.
1. Connect the USB Micro-B connector to the external hard drive and the USB-A connector to your com-
puter.
2. Wait until the driver installation is complete. In „This PC", there is now another drive with the name
"Intenso". As soon as the external hard drive is connected to the computer, the LED lights up. The LED
flashes when a write or read operation is being carried out. The LED lights up blue when the external
hard drive is operated on a USB 3.x port, and on a USB 2.0 port, it lights up green.
Removing the external hard drive
Depending on the operating system used, the external hard drive must be ‚Ejected' before the connection
to the computer is interrupted. For more information, please refer to the help section of your operating
system provider.
USB-A
EN - Page 4 of 5
USB-Micro-B
