Preparation before putting coffee beans
Make sure the bean box is
locked before putting
coffee beans.
1. The red light flashes when
the bean box is in an
unlocked state, and the
grinding function does not
work.
2. The blue light flashes when the bean box is
in a locked state, and the grinding function
can work.
e
Fin
Coarse
Press to
start the grinding function.
Then use the adjusting wheel to adjust to
require thick and thin coffee powder
Coffee Bean Grinding
Control key 1
Control key 2
Control key 1: press
press again to stop the grinding.
Control key 2: push forward the brewing cup to start
grinding, and push the control key 2 again to stop
Method 1
Press
to start grinding, until reaching the desired
amount of coffee powder, and press
grinding.
Method 2
Push forward the brewing cup to start grinding, until reaching
the desired amount of coffee powder, and push the brewing
cup again to stop grinding.
to start grinding and
! Attention:
1. After pressing the GRIND key, it will automatically stop
grinding after 13 seconds without any operation;
2. You can stop grinding by both pushing forward the
brewing cup again and press
Reminder
again to stop
When the grinding time lasts for 4
minutes (about 6-7 times), the red light
of the grinding button lights up, the
machine stops the grinding function,
and the grinding function returns to
normal after the machine rests for 8
minutes.
7
Pour no more than 150g of
coffee beans into the bean box
key again.
