Strong H80 Pro Guia De Inicio Rapido página 10

Mount on Ceiling
1. Stick the positioning sticker at the position to be installed, and drill
holes according to the screw hole mark shown on the sticker;
2. Use a hammer to knock the plastic expansion pipe into the hole,
and then use screws to fix the ceiling base (please note that the
side with the arrow faces downward);
3. Align the groove at the bottom of the camera with the convex part
on the base, and rotate the camera clockwise until it is locked.
Precautions for Installation
* The installation wall can bear at least 3 times of the total weight of camera.
Ceiling & Wall
Positioning Sticker
Plastic Expansion Pipe
Ceiling Base
(Ensure that the side with the
arrow is facing down)
Retaining Screw
Camera
(Rotate clockwise and tighten)
7