Idiomas disponibles
Idiomas disponibles
0702645X - GB Seite 13 Samstag, 15. Mai 2004 8:34 08
Tool Specifications
Jigsaw
Article number
Jigsaw
Article number
Rated input power
Output power
Stroke rate at no load
Stroke
Stroke Rate Preselection
Constant Electronic Control
Cutting capacity, max.
– Wood
– Aluminium
– in non-alloy steel
Bevel cuts (left/right)
Weight without cable, approx. 2.7 kg
Protection class
*Item not available in all countries
Intended Use
The machine is intended for making separating cuts
and cut-outs in wood, plastic, metal, ceramic plates
and rubber while resting firmly on the workpiece. It
is suitable for straight and curved cuts with mitre
angles to 45°. The saw blade recommendations are
to be observed.
The user is responsible for damage caused by usage
other then intended.
Operating Controls
1 Vibration damper
2 Lock-on button for On /Off switch
(STP 135-B exact)
3 On/Off switch
4 Stroke rate preselection thumbwheel
5 Vacuum hose**
6 Vacuum connection **
7 Base plate with mit interior extraction channel
8 Sliding shoe for base plate**
9 Switch for sawdust blowing device
10 Lever for adjustment of pendulum action
11 Pushbutton for Exact Cut
12 Stroke rod
13 Guide roller
14 Exact Cut guide
15 Saw blade **
16 Contact protector
17 Dust cover for vacuuming **
STP 135-S exact*
18 Clamping lever for saw blade release
0702 645 X
19 Scale for mitre angle
STP 135-B exact*
20 Angle gauge**
0702 646 X
21 Thumbwheel for pre-tension of base plate
720 W
22 Lever for base-plate adjustment
310 W
23 Splinter guard
500 – 2 800 spm
24 Circle cutter/parallel guide**
26 mm
** Not all of the accessories illustrated or described are
included as standard delivery.
135 mm
20 mm
Before any work on the machine itself, pull the
10 mm
mains plug.
0 – 45 °
Inserting the Saw Blade (see figure
/ II
When inserting and changing the saw blade 15
we recommend wearing protective gloves.
Insert the saw blade (teeth in cutting direction) into
the stroke rod until it latches. While inserting the saw
blade, pay attention that the back of the saw blade
is positioned in the groove of the guide roller 13 .
12
Exact Cut
Exact Cut can be applied for all applications, includ-
ing mitre cuts. Exact Cut is particularly recom-
mended for cuts in thick wood; the cutting angle is
maintained and run-off of the saw blade is reduced.
For further information, see "Tips".
Replacing/Inserting the
Saw Blade
Note: If the saw blade
14
can not be inserted into
the
because the grooves of
the saw blade holder
are not in the right posi-
tion or because the
Exact Cut guides 14 are
shut (see figure), briefly
press
lever 18 towards the
front and release again.
To improve the sideward stability of
the inserted saw blade, press the
pushbutton for Exact Cut 11 . The saw
blade 15 is guided laterally by means
of the Exact Cut guides 14 which ena-
bles precision cuts.
)
A
stroke
rod 12
the
clamping
13
