EN:
IMPORTANT! KEEP FOR FUTURE REFERENCE
READ CAREFULLY
* Your child's safety is your responsibility.
* Whether the bed is designed to be dismantled for storage or transportation
* Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person.
* Follow assembly instructions in detail to ensure the safety features of the cotbed are not compromised.
* Take care when handling or moving the furniture. Careless handling may cause damage.
* Toddler bed age range of child is 18 months to 4 years.
* Keep children away during assembly as pack contains small parts which may present a choking hazard.
* Remove all parts from packaging and check against the parts list.
* Do not discard any packaging until you are sure you have all parts and the pack of fittings.
* You will find it easier to assemble the cotbed if a second adult is available to help you.
* WARNING. Do not place this child's bed near heat sources, windows and other furniture.
* Children are likely to play, bounce, jump and climb on beds, therefore the child's bed should not be placed too
close to other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be placed either
tight to any wall or have a gap of 300mm between the wall and the side of the bed.
* WARNING : Do not use if any part of the bed is broken, torn or missing and use only spare parts approved by
the manufacturer.
* WARNING : Do not leave anything in the cot or place close to another product, which could provide a foothold or
present a danger of suffocation or strangulation e.g. strings, blind/curtain cords etc.
* Keep medication, string, elastic, small toys or small items, such as money, out of reach from any position in the cot.
* WARNING : Do not use more than one mattress in the cot.
* RECOMMENDED MATTRESS SIZE: This cot has been manufactured for use with a mattress which measures
700 mm wide by 1400 mm long and 100 mm in thickness. The width and length are specified because it is important
that the gaps between the mattress and the sides and ends of the cot will not exceed 30 mm when the mattress is
pushed to one side or end, and 15 mm when the mattress is centered in the cot. This is to minimize the risk of a child's
limb becoming caught in the gap.
* WARNING: TO PREVENT FALLS, THE MAXIMUM MATTRESS THICKNESS SHOULD NOT
EXCEED 100 mm.
* WARNING: TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED
TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
* All assembly fixings should always be tightened properly. Periodically check all fixings to ensure none have come
loose, and that there is no risk of clothing or parts of the body becoming snagged or trapped.
* Do not allow your child to jump on the bed. This may result in damage to the furniture and/or injury to your child.
* Your furniture may be cleaned by wiping with a damp cloth and drying with a soft clean cloth. Do not use
abrasives, bleach, alcohol or ammonia based household polishes.
* This furniture is made to confirm to safety regulations: BS 8509 : 2008 + A1:2011
* Made in Latvia