small power button
red LED indicator
large power button*
number buttons
*for learning mode press large power
button and channel down key simul-
taneously
AV / external input button
OK button
channel up button
volume down / up buttons
channel down button*
lamp button to activate illumination
special buttons 1 & 2
Hint: To assign special functions of the original remote
control (such as mute, menu or teletext), you can use the
two special buttons.
Preparation:
Insert batteries into the FeinControl and the desired source remote control. Place the remote controls at a dis-
tance of approx. 4 cm from each other on a table so that the infrared transmitters are facing each other:
Learning mode
Press the large power button and keep it pressed. Then briefly press the "Channel down" button
time. The red LED now flashes permanently, the FeinControl is in learning mode.
To learn-in, first press the desired target button on the FeinControl. The red LED then lights up permanently. Now
press the button on the source remote control. When the command has been accepted, the LED flashes again.
You can now continue with the next button.
Note: If you do not press any key for 15 seconds, the learning mode switches off. Previously saved commands are
retained. You can restart the learning mode at any time. You can change or overwrite the saved key assignments
as you wish. All settings are retained even after the battery has been changed.
The choice of buttons is completely up to you. You just need to remember the assignment if the button on the
original remote control is labelled differently!
The learning mode can be ended by holding down the large power button and then pressing the "Channel
∨
down" button
. The LED goes out and you are in the operating mode. Now control your device comfortably
with the FeinControl. The red LED lights up briefly each time the button is pressed.
Illumination:
For better operation in the dark, the FeinControl has a keyboard illumination. Press the lamp symbol to switch it
on. The light switches off automatically 7 seconds after the last key press.
∨
at the same