③
•
NOTICE Do not inflate the cushion Ⓐ too much.
④
•
Put the Active Wobble Cushion against the back of your chair.
•
Lean back onto the backrest of your chair and avoid instability.
WARNING Do not exceed the maximum loading capacity.
⑤
Deflate the cushion Ⓐ by pushing the needle Ⓒ into the valve and pushing
•
down on the cushion Ⓐ.
Technical specifications
Product codes
Dimension
Available colors
Maximum load capacity
Maintenance
To clean the Active Wobble Cushion:
Wipe the cushion Ⓐ using a wet cloth and mild detergent. Do not use
•
solvents as these could damage the product.
Warranty
1.
Leitz gives you a 2-year guarantee for defects in materials and
manufacturing.
2.
Leitz guarantees that when faults arise due to defects in manufacturing
and materials during the guarantee period, it will repair or, if necessary,
replace the product, free of charge. A guarantee for normal wear and tear
is hereby expressly excluded.
3.
The Leitz guarantee shall lapse in the following cases:
4.
You can find the warranty terms and the contact details of your local
customer service on the Leitz website.
6
ID_WC.indd 6
ID_WC.indd 6
a.
If the product has not been set-up and used in accordance with
these instructions;
b.
If the product has been altered or repaired by someone other than
Leitz;
c.
If a fault arises due to external causes;
d.
If the product is used for different uses than intended in this
document.
65390089
360mm x 55mm x 360mm
Dark Grey
150 kg
28-4-2023 14:56:52
28-4-2023 14:56:52