Yoer DE01W SECCO Instrucciones De Uso página 50

TROUBLESHOOTING
Problem
The device does
not work
Dehumidifying
mode does not
work properly
The device
makes noise
The,,E1'' or,,E2"
indicator is
flashing.
The,,EH''
indicator is
flashing.
The,,E5''
indicator is
flashing.
Possible cause
The power cable is disconnected
from the socket.
The water tank is full. The flashing
full water tank indicator on the panel
signalizes it.
The water tank is not mounted
properly.
The appliance is not installed in a
room temperature within the range of
7 to 35 ºC (44-95 ℉).
The filters are dirty.
The air inlet or outlet is blocked.
The device is no placed on a flat
surface.
The air inlet or outlet is blocked.
The temperature sensor does not
work properly.
The humidity sensor does not work
properly.
The pump does not work properly.
ENGLISH
Connect the power cable to
the socket.
Empty the water tank.
Mount the water tank in a
proper way.
Install the device in a room
temperature within the range
of 7 to 35 ºC (44-95 ℉).
Clean the filters.
Check and remove any
obstacles that may hinder the
airflow.
Place the unit on a flat, stable
surface.
Check and remove any
obstacles that may hinder the
airflow.
Contact the Yoer service.
Contact the Yoer service.
Contact the Yoer service.
50
Solution