Idiomas disponibles
Idiomas disponibles
Warnings
Read all safety warnings and all instructions before use. Failure to follow the warnings and
instructions may result in electric shock, fire or serious injury. You can save this manual for
future reference.
1. This appliance is not intended for persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their
safety.
2. Children should be supervised to ensure that they do not play with this appliance.
3. If the supply cord is damaged, it must be replaced by qualified persons in order to avoid a
hazard.
4. Safety boots, safety gloves, safety helmets with visors, hearing protection and other similar
products shall be worn while operating the machine.
5. When opening the spray gun, there is a danger of kickback force and a sudden torque,
please hold the nozzle tightly.
6. High pressure jet can be dangerous if operated by mistake. Do not aim the jet at persons,
electrical equipment or the machine itself directly.
7. Please disconnect the power supply before performing maintenance.
8. Do not spray with flammable liquid to reduce the risk of explosion.
9. To ensure machine safety, use only original spare parts from the manufacturer or approved
by the manufacturer.
10. High pressure hoses, fittings and couplings are important for the safety of the appliance.
Use only hoses, fittings and couplings recommended by the manufacturer.
11. The water passing through the backflow preventer is considered as non-potable water.
12. The machine shall be disconnected from its power source by removing the plug from outlet
during replacement or maintenance.
13. Do not use the machine if supply cord or important part like safety device/high pressure
hose/spray gun is damaged.
14. The plug and socket must be watertight if connected with extension cord.
15. It is recommended that the power supply for this machine should include a residual current
device, which will interrupt the power supply if current leaks.
3
