Pre-installation
This appliance is intended to be used in household and similar applications such as:
1. Staff kitchen areas in shops, of ces and other working environments;
2. Farm houses and by clients in hotels, motels and other residential type environments;
3. Bed and breakfast type environments;
4. Catering and similar non-retail applications.
PLANNING INSTALLATION
WARNING: Explosion Hazard. Keep ammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or re.
□
The refrigerator should be located on a completely at surface.
□
Leave about 2 to 4 inches (5-10 cm) between each side of the appliance and the wall.
□
Leave 12 inches (30 cm) between the top of the appliance and the ceiling.
□
Choose a location which is not exposed to sunlight, high temperature or humid, as humidity may cause stain.
□
The appliance can be adjusted by turning its two legs in the front of the bottom panel when it is unstable.
□
Turning them in the clockwise direction can raise the refrigerator.
□
The location should be rm and at. An unsecure position may cause noise and vibration. The noise may be
increased if the oor is not rm. Put a sheet under the appliance to solve the heat emission if you need to locate
it onto a carpet.
□
Make sure the adjustable legs are rm on the oor, and set the appliance slope backward slightly to keep the
doors closed tightly.
□
Make note of the position of the contents and retain packaging for future packing and moving.
□
Do not lift by the door handle when moving the appliance.
□
Do not tilt the appliance more than 45 degrees.
□
Avoid strong vibration and collision.
TOOLS REQUIRED
#2 Phillips screwdriver
Flat head screwdriver
5
Please contact 1-855-847-7264 for further assistance.
HOMEDEPOT.COM