Idiomas disponibles
Idiomas disponibles
Audio settings
1. Press and hold the MENU button 4.
2. Turn the PRESET knob 7 to select the Audio Settings submenu.
3. Press the Play/Pause button 5 and turn the PRESET knob 7 to select between "Auto
Stereo" and "Mono".
4. Press the Play/Pause button 5 to confirm.
AUX IN mode
In AUX IN playback mode, the device switches off automatically after
approx. 15 minutes if there is no audio input and no action is performed.
1. Switch on the device.
2. Press the SOURCE button 2 repeatedly until AUX IN mode is shown in the LCD
display 9 .
3. Connect one AUX cable to the AUX IN connector 10 of the unit and the other end
to the LINE OUT output of a computer or other device.
4. Turn on music playback on your external device.
5. Adjust the volume with the volume control 3 .
BLUETOOTH mode
External devices that have a built-in Bluetooth function can be connected to this unit
and played through the loudspeakers.
1. Switch on the device.
2. Press the SOURCE button 2 repeatedly until BLUETOOTH mode is shown in the LCD
display 9 .
3. Activate the Bluetooth function of your external device.
4. Start the search for Bluetooth devices on your external device.
5. Pair the "Linsar Radio" from the device list with your external device.
In some cases you will be asked for a password. Enter "0000" and press "OK" on
your external device.
6. Once the Bluetooth connection is established, switch to the music player on your
external device and start playback.
7. Normally, music playback can be controlled with the Play/Pause button 5. The track
is selected with the PRESET knob 7 .
85
