Craftsman 917.378340 Manual Del Usuario página 10

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
SCHEDULE
n EGO RSERVCE
E____ R V OE 0 A TES
Check for Loose Fasteners
_
Clean/Inspect Grass Catcher
(If Equ,pped)
_
_
M
Clean Lawn Mower
Clean Under Drive Cover
W
(Power-Propelled
Mowers)
Check drive belt/pulleys
(Power-Propelled.Mowers)
I1_
R
ChecklSharpenlReplace
Blade
1_3
Lubrication Chart
I_'
V'
Clean Battery/Recharge
IElectric Start Mowers I
I_
1_4
E
Check Engine Oil Level
t_'
Change Engine Oil
V#!,2
G
Clean Air Filter
_#_ 2
Inspect Muffler
N
Clean or Replace Spark Plug
Replace Air Filter Paper Cartridge
1_2
1 - Change more often when operating under a heavy load or in high eminent temperatures,
2 - Service more olten when operating in dirty or dusty conditions.
3 - Replace I_ades more often when mowing in sandy soil.
4- Charge 48 hours at end of season.
LUBRICATION
CHART
GENERAL RECOMMENDATIONS
The warranty on this lawn mower does
not cover items that have been subjected
to operator abuse or negligence.
To
receive full value from the warranty,
operator
must maintain mower as
instructed
in this manual.
Some adjustments
will need to be made
periodically
to properly
maintain your
unit.
All adjustments
in the Service and
Adjustments
section of this manual
should be checked at least once each
season.
• Once a year, replace the spark plug,
clean or replace air filter element and
check blade for wear.
A new spark
plug and clean/new
air filter element
assure proper air-fuel mixture and help
your engine run better and last longer.
• Follow the maintenance
schedule
in
this manual.
(_) Wheel adjuster
on each wheel)
(_) Handle bracket mountingpins
_) Spray lubricant
(_
Brake
spring
bracket
Rear
door hinge
BEFORE
EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See =LUBRI-
CATION CHART").
10
_) See "ENGINE'
In Maintenance
section
IMPORTANT:
Do not oil or grease
plastic wheel bearings.
Viscous
lubricants will attract dust and dirt that
will shorten the life of the self-lubricat-
ing bearings.
If you feel they must be
lubricated, use only a dry, powdered
graphite type lubricant sparingly.
loading