Cleaning, Care & Maintenance - lidl DL901 Manual De Instrucciones

UK
2
3
Cleaning, Care & Maintenance
• Clean with a damp cloth.
• Polish with a suitable wood polish.
• Regularly check excessive wear of components and tighten all bolts.
Compliance
BOLERO parts have undergone strict product testing in order to comply with regulatory standards and
specifications set by international, independent, and federal authorities.
This product conforms to: BS EN 14988-1 & 2 : 2006 + A1: 2012
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of BOLERO.
Every effort is made to ensure all details are correct at the time of going to press, however, BOLERO reserve the right to
4
DL833_DL900_DL901_ML_A5_v1_1703020.indb 4
Shorter width
angle cuts at top
change specifications without notice.
Step 2:
Place back panel (B) into the back
slot with the warning instructions
facing backward.
Place seat (C) into the slots with
the waist belt's locking ends
hanging downward.
Insert barrier bar (D) into the slot
on the side panel.
Step 3:
Tap foot rest (E) into its slots.
Install bolts and make sure
that the angle cuts on ends are
properly aligned with shorter
width at top.
Tap in stretchers (F) and install all
remaining connector bolts.
Check chair balance and tighten
all bolts to complete assembling.
Bolts can come loose over time.
Check bolts for tightness and
re-tighten periodically.
2017/3/20 11:51