Access Code - Schulz Control I Manual De Instrucciones

4.4 – DISPLAY STRUCTURE AND MENU NAVIGATION
lists. All the items on list 00 are only for visualization and cannot be adjusted; an access code is necessary to enter lists subsequent to list
00.
Normal Operation Mode (list 00):
During start-up of the control, all the display elements and LED indicators turn on for 3 seconds; the display will then show the software
version for 3 more seconds, before the start-up is complete and the operation menu (list 00) is shown. All the items available on display
(temperature, pressures and hour meters) can be selected at any time using the DOWN and UP buttons. The item shown will return to stan-
dard after 35 seconds, if no other selection is made. Pressing the ENTER button will lock any selected item on the display and will prevent
the return to the standard screen. A key symbol will appear when an item is locked. To unlock an item, press UP or DOWN to see an alternate
screen of items, or press RESET or ESC. No value, option or parameter can be adjusted on list 00; if a fault condition occurs, the fault code
becomes the first item on the display list. More than one active fault code item can appear at any moment.

Access Code:

Access Code "accepted"
Access Code "rejected"
The access to some pages of the menu mode depends on the level of authority determined by the used access code.
An invalid code will cause the screen to return to user menu on page 00.
The pages and access levels used are the following:
Access code typing time:
When in the menu mode, if no activity is detected on the screens for a certain period of time, the display will return automatically to the user
menu: page 00. This time depends on the level.
Navigation on Menu Mode:
P00 P01
+
1
2
- +
3 USER CONFIGURATION
All the value, parameters and option settings are grouped in lists or menus.
The items are placed on lists according to the type and classification. The items the
operator can visualize during the routine operation, such as, for example, pressure or
temperature values, are placed on the user menu's list.
Lists are identified by number; the number of the user menu's list is 00. All adjustable
parameters and options are placed from list 01 of the configuration mode to subsequent
The access to the pages subsequent to page 00 is restricted by an access code. To
access the menu pages, press MENU BUTTON; the access code screen will be shown
and the first digit of the code will flash. A four-digit code is necessary.
Use MORE or LESS to adjust the value of the first digit, and then press ENTER. The
next digit will flash; use UP or DOWN to adjust, and then press ENTER.
Repeat the operation for the four digits. If the code is a number smaller than 1000, the
first digit(s) must be zero. To return to a previous digit, press ESC. When all the digits
have already been adjusted according to the authorized code number, press ENTER.
Access Level = USER
(Code = 0009)
P00, P01, P02, P11
User: 1 minute
P02
Each page in the menu mode (1) is identified by symbols (2) and by text (3).
The symbolical identification of the menu defines the type of page and access level.
Access Level = SERVICE
(Code = 0100)
P00, P01, P02, P03
P04, P05, P06, P07
P08, P09, P11
Service: 10 minutes
87