Idiomas disponibles
Idiomas disponibles
Startup
Shutdown
Each icon represents an attached expansion battery. The AC200P L can display
up to 2 battery icons.
The bar increases during charging and decreases during discharging.
The AC200P L is charging in Turbo Charging Mode.
The ECO Mode is enabled to save power.
The remaining battery capacity.
The AC200P L is charging in Silent Charging Mode.
The AC200P L is charging from a DC power source, such as solar panels,
lead-acid batteries, etc.
The AC200P L connects to BLUETTI App via Bluetooth.
The AC200P L connects to BLUETTI App via WiFi.
When it lights up, the fan is activated and working properly. If it flashes, there
may be a problem with the fan.
The real-time AC charging power.
The real-time total AC output power.
The real-time AC output voltage.
The real-time AC output frequency.
The AC200P L is charging from the home grid.
The DC output is turned on.
The AC output is turned on.
The AC200P L is operating in Power Lifting Mode.
The remaining time of charging or discharging.
: Charging
The temperature inside the unit is lower than -20°C (-4°F).
The temperature inside the unit is higher than 70°C (158°F).
The AC200P L is overloaded.
The AC200P L is drawing too much current, which can cause damage to the unit
or any connected devices.
There's an issue with the AC200P L, which may require troubleshooting or repair.
The real-time DC output power.
The SoC drops below 5%.
The real-time DC input power.
LCD Instructions
: Discharging
LCD lights up
LCD lights off
15
EN
JUST POWER ON
