Celestron STARPOINTER PRO Manual De Instrucciones página 4

StarPointer Pro Finderscope TM
INSTALLING THE STARPOINTER PRO FINDERSCOPE
1 1
1. Loosen the two chrome mounting
screws near the bottom of the
finderscope.
4 4
4. If your bracket is the dovetail type,
loosen the setscrew on the telescope
mounting bracket, slide the base of
the finderscope into the bracket and
tighten the setscrew.
* SOLAR WARNING! Never attempt to view the Sun through this finderscope or any telescope without a solar filter!
4 | ENGLISH
2 2
2. Choose the correct bracket for your
telescope and attach it to the base of
the finderscope.
5 5
OR
If your bracket is the screw-on type,
remove the two Phillips-head screws or
thumb screws from the telescope. Place
the finder over the screw holes or posts.
Tighten the screws or thumb screws
down to secure the finderscope in place.
3 3
3. Tighten the chrome mounting screws
to secure the bracket in place.