Idiomas disponibles
Idiomas disponibles
CARBON FILTER
1. Before installing or replacing the carbon filters, disconnect the mains power to
the unit.
2. Press the filter lock and remove the mesh filter.
3. Turn the carbon filter on both sides of the motor anti-clockwise. Replace the
carbon filters with the new carbon filters.
4. Place the mesh filter.
5. Connect the power supply to the wall socket.
NOTE:
Make sure the filter is securely locked. Otherwise, it would loosen and cause
•
danger.
When activated carbon filter attached, the suction power will be lowered.
•
BULB REPLACEMENT
Important :
Note:
Before replacing light that the cooker hood can be isolated from the supply
mains by means of a plug or an all-pole switch.
Protect against danger when changing lights, such as wearing gloves.
The bulb must be replaced by the manufacturer, its service
agent or similarly qualified persons.
Always switch off the electricity supply before carrying out
any operations on the appliance. When handling bulb, make
sure it has completely cooled down before any direct contact
with hands.
When handling bulbs hold with a cloth or gloves to ensure
perspiration does not come in contact with the bulb as this
can reduce the life of the bulb.
