Interrupt the descaling programm
G
H
I
J
K
L
M
Fig. 1 Starting the descaling programme
− Stopping the programme
Within 5 seconds (when the stop symbol
D press key (K).
− After 5 seconds (when the stop symbol key above key (K) has stopped flashing):
D Hold programming key (G) down until fig. 1 re−appears on the display.
− After pouring in the descaler solution, the programme can not longer be aborted by pressing the red
stop key.
WARNING
n Stop the descaling programme never when you have already poured descaler into the machine!
PIN Codes
TIP
− In order to enter the programming unit of operator and principal user, you have to know following
codes:
Operator
D Push the stop key (K) and release it, thereafter push ⇑⇑⇑⇓⇑.
Now you can run through the programming unit with the arrow keys (M)⇓ or (N)⇑. If you wish you make
an adjustment, first push one of the selection buttons (G, H, I, J).
Principal user
D Continuously push the stop key (K) and the same time push the following keys ⇑⇑⇑⇓⇑.
Service technician
D Continuously push the stop key (K) and the same time push the following keys ⇑⇑⇑⇓⇑.
D Push upper push−button (G) for 30 seconds.
B / BHW
N
above key (K) still flashes):
ECopyright Bravilor Bonamat B.V.