Idiomas disponibles
Idiomas disponibles
Troubleshooting
Error codes
Error code
E01
Sensor warning
E02
Sensor warning
E03
Sensor warning
E06
Sensor warning
E07
Sensor warning
E08
Low voltage warning
E09
Freezer does not cool
sufficiently
Meaning
Possible cause
This warning is displa-
yed if the power supply
provides a voltage of
less than 170V.
It is likely to occur after
a long blackout.
Contact the official service centre
as soon as possible
Contact the official service centre
as soon as possible
Contact the official service techni-
cian as soon as possible
Contact the official service techni-
cian as soon as possible
Contact the official service techni-
cian as soon as possible
This is not a malfunction of the equi-
pment, but an error that helps to
prevent damage to the compressor.
It is necessary to increase the volta-
ge back to the required levels. If this
warning persists, contact an autho-
rised technician.
1. Set the freezer temperature to
a colder setting or set the freezer
to Super Freeze mode. This should
clear the error code once the requi-
red temperature has been reached.
Keep the doors closed to improve
the time it takes to reach the correct
temperature.
Remove any products that have
defrosted during this error. These
should be consumed within a short
period of time.
3. Do not add any fresh products to
the freezer compartment until the
correct temperature has been rea-
ched and the error does not conti-
nue. If this warning persists, contact
the authorised technicians.
40
English
Solution
infiniton.es
