Idiomas disponibles
Idiomas disponibles
Warning.
In the heating function, the fan only works at a fixed speed "Medium", the speed cannot be chosen.
1. "ON/OFF" button
-
Press this button and the appliance will start working in "HEAT I" mode (low temperature).
The indicator on the control panel will light.
-
To turn off, press this button again and the device will stop working 30 seconds after the fan
runs at "MEDIUM" speed.
2. "WIND/HEAT" button.
-
Press this button for the first time when the air cooler is working, the "HEAT II" indicator will
light and the appliance will switch to high temperature air.
-
If you press this button again the appliance will return to "HEAT I" mode (low temperature).
How to fill the water tank.
Take out the water tank from the bottom of the air cooler to the back and fill 1/3 of the water tank
with water.
-
Pay attention to the water level indicator while filling the tank.
-
The water level in the tank must be lower than the "MAX" level sign.
-
The water level in the tank must be higher than the "MIN" level sign.
-
Ice boxes (or ice) are placed inside the water tank when the user you want to have cooler air
or breeze.
How to use ice boxes.
The ice box can be placed in the tank cold or frozen.
Cold can slowly absorb heat from the water, while frozen can make the temperature of the water in the
tank lower than that of the surroundings.
Therefore, an air cooler with frozen ice boxes can generate cooler air.
-
Fill the ice boxes with water and place them in the refrigerator or freezer, depending on the level
of freshness you want to obtain.
-
Once the ice boxes are ready, that is, cold or frozen,
-
Take out the water tank, insert the ice boxes and close the tank.
Cleaning.
1. Clean the air filter
Remove the plug and pull the air filter holder by hand while disassembling the air filter, then clean
the air filter with a neutral cleaner and a soft brush. Then clean it with water and then take the air
filter to the air cooler.
