Idiomas disponibles
Idiomas disponibles
▪
Note: please charge the battery after using each time, it is necessary to charge the
battery per month if the machine is out of work.
9 ASSEMBLY
▪
Before you start the appliance, make sure that the dust filter is in the position. (Fig. 4)
▪
Assemble the ash vacuum cleaner. (Fig. 5)
▪
Connect the hose, the notch is aimed at the triangle. (Fig. 6)
▪
Connect the aluminium nozzle. (Fig. 7)
▪
Install the battery pack. (Fig. 8)
Note: Before use the ash vacuum, make sure all connectors and the dust
filter subassembly is tightly fastened. The container and dust filter must be
completely dry.
10 OPERATION
▪
Before you start the appliance, make sure that the filter is in the position.
▪
Switch on.
≤40 °C!!! For use with cold ashes only!
11 CLEANING AND MAINTENANCE
Clean the filter before/after each use
▪
If the suction strength deteriorates during use, turn off the ash vacuum cleaner.
▪
Once the container is full to the suction nozzle, empty the contents of the container.
▪
Remove the suction hose and loosen the cover with the lock tabs.
▪
Hold the dust filter and loosen the V type nut by hand
▪
Remove the cover and dust filter from the metal rod
▪
Wash the dust filter by clean and warm water.
▪
Dry the dust filter before re-use.
Caution: Do not use cleaning agents to clean the plastic parts of the tool. A
mild detergent on a damp cloth is recommended. Water must never come
into contact with the tool.
Copyright © 2021 VARO
ii.
L2 & L3 light all lit: the battery has about 60% capacity.
iii.
L3 light is lit: battery almost discharged.
P a g e
POWDP6020
| 6
EN
www.varo.com
