Uline H-4003 Guia Del Usuario

H-4003
MOUSE TRAP
WARNING! Edges may be sharp. Wear gloves
when handling product.
• Place trap lengthwise against a wall or object.
NOTE: Ensure entrance holes are closest to
the wall or object. Baiting is not necessary.
• A small piece of cotton with a scent attractant
placed on the inside center of trap may help catch
mice sooner. Artificial vanilla or almond extracts
work well.
• Elevate trap as needed up to 2" in area where water
may gather on floor or other surfaces.
• If device is moved from original location, reposition
trap as noted above or select a new location to
minimize trap movement. Secure trap with cable
ties, wire, glue or other appropriate methods as
necessary.
• Trap allows for the use of glue boards that fit
between ramps and outside edge of the trap.
• An unglued section near the entrance will help
prevent mice from blocking the entrance.
• Ramp modules can be removed to allow trap
to be used with a larger glue trap or glue board
if necessary. Use caution when removing ramp
module to avoid damaging module.
• Check trap regularly.
PAGE 1 OF 3
1-800-295-5510
uline.com
HELPFUL TIPS
CLEANUP
Submerge trap in water for quick disposal of trapped
rodents or release them.
IMPORTANT! Check local laws before releasing
any trapped animal.
• Hinged cover allows for easy cleanup.
• Trap is reusable.
Ramp Modules
Para Español, vea página 2.
Pour le français, consulter la page 3.
Hinged Lid
Entrance Hole
0224 RH-4003