Idiomas disponibles
Idiomas disponibles
II. Instructions for use:
1. Setting up the tent
Lift the tent to the height of the roof racks and slide it sideways.
Set the tent to a central position on the roof (make sure
the tailgate and side doors can be opened).
Slide the T-screws into the outer slot of
the rail to the desired positions. (As
indicated in P1)
Pass one end of the U-bracket through the
screw, place the M8 flat washer, the M8 split
washer, screw in the plastic nut and slide it
through the center empty slot. (As shown
below and P2)
Rondelle plates
Split washer
Screw the other side of the U-shaped
mounting bracket with the component in the
order shown above, and make sure the
bracket is tightened (as shown in P3, same
operation for the rest).
T-bolts should be upright and tightened at the same time to keep them straight.
P1
P2
P3
-2-
EN
Mounting rail
U-shaped patte is
