Idiomas disponibles
Idiomas disponibles
Pairing
The speaker must be paired with a Bluetooth
1. Switch on the speaker, the device is in direct BT mode. Search for Bluetooth
from which the audio files are to be played (Bluetooth® on audio source must be activated).
2. Select the „Lizz" speaker from the list of devices found and confirm the connection.
Your device is now paired with the Fontastic
Note: After a device has been successfully paired, the speaker automatically connects to the last paired device
the next time it is used. Automatically connects to the last paired device the next time it is used. The product can
only be connected to one Bluetooth device at a time.
If you are not sure how pairing works with your Bluetooth
the device. If you are using a Bluetooth® device without a display, switch it to pairing or connection mode and wait a few
seconds until the connection with the Lizz has been established.
Note: For wireless music streaming, the audio source must support the A2DP and AVRCP profile, to play and
control music via the Lizz.
Mode button
- Long press to switch between the operating modes BT mode, FM radio and AUX mode.
- Short press to adjust the microphone volume, treble, bass and echo.
(BT mode, microSD card mode, USB mode)
Music control
To play or stop music, briefly press the start/stop button
To skip to the previous track, briefly press the Previous track button
To skip to the next track, briefly press the Next track button
USB mode
Insert a USB storage medium into the USB port of the Fontastic Lizz. USB mode starts automatically. „USB" is shown
on the display. The files stored on the medium are played.
SD card mode
Insert a MicroSD card into the card slot of the Fontastic Lizz. The SD card mode starts automatically and „SD" is shown
on the display. The files stored on the medium are played.
AUX mode
Connect a 3.5 mm audio cable to the AUX input of the Fontastic Lizz. Press and hold the MODE button to switch to AUX
mode. „LINE" is shown on the display. The music played on the connected device is output via the loudspeaker.
Note: The music control buttons have no function in Aux mode. The music must be controlled on the audio
source.
FM radio
Press and hold the MODE button to switch to radio mode.
Briefly press the Start/Stop button to automatically search for receivable FM stations.
Press the Next track or Previous track buttons to receive the next or previous FM station.
Sound setting (EQ)
Various sound modes are available. Press the EQ button on the remote control while music is playing to switch between
the different modes.
Using the microphone
Insert the jack plug of the microphone cable into the microphone input of the Lizz. Switch the microphone on by sliding the
on/off switch to the ON position. Singing or speech into the microphone is now output via the loudspeaker.
Press the MODE button on the speaker to make settings such as treble, bass, volume and echo. Make the settings in the
corresponding menu using the Volume+ button and Volume- button.
device in order to transfer and output audio files wirelessly.
®
Lizz speaker. An acoustic signal sounds to confirm.
®
®
device, please refer to the device's operating instructions for
.
.
®
audio devices with your Bluetooth
.
GB
®
device
6
