Create WIPEBOT Manual Del Usuario página 9

• Ensure the power line and plug are completely connected.
• Long-press the power button (more than 3 seconds), the robot will turn on. After the fan is
running, attach the robot on the glass to a location far away from the window frame.
• Ensure the robot is stuck on the window and then release it.
• Short press the power button to start the robot.
• When the robot is running, hold the safety cable with one hand, short press to stop the robot
and take it down with the other hand.
• lf your hand can't reach the robot, please use the remote or the safety cable to pull it back.
Pull the robot from one side which is as close to the glass as possible and prevent pulling off
the robot.
• After completely taking down the robot, long-press the power button (more than 3 seconds)
to turn it off.
• This robot is equipped with an internal battery, which can hold on the robot for twenty min-
utes in case the robot is accidentally removed from the power cord and it will raise an audible
and visual alarm. Please take down the robot as soon as possible.
• When the light indicator is red before turning on the device, it means the internal battery is
too low to start the robot. Please, keep the robot connected to the electricity to charge it until
the red lamp is off.
• Put the windows cleaner in the centre of the glass far away from the window frame. Long
press the Power/Start button to turn the robot on, and then short press the button to start it.
The robot will automatically move upward, then move right. At last, it will reach the top right
corner of the glass.
• After the robot has reached the top right corner, it will start to clean the glass by drawing an
S-shaped curve from top to bottom.
• After completing the cleaning, the robot will stop at the lower-left or right corner according
to the glass shape.
GETTING STARTED
POWER OFF PROTECTION
PATH PLANNING
E NGLI SH 9