D
a
Quick start guide
Streaming microphone
For more information see the extended manual online:
ned.is/gsmic410bk
Intended use
This product is a streaming microphone kit consisting of a
microphone, a pop filter, a desktop stand, and a shock mount.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
Desktop clamp
1
2
Shock mount
Volume wheel
3
Microphone
4
5
Record button
6
USB-B port
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not open the product, there are no user serviceable parts
inside.
• Do not immerse the product in water or other liquids.
• Do not expose the product to water, rain, moisture, or high
humidity.
GSMIC410BK
Pop filter
7
8
USB-B – USB-A cable
Foam cover
9
Stand
q
w
Adjustment knob
• Disconnect the product from the power source before cleaning.
• Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
• Do not let children play with the packaging material. Always keep
the packaging material out of the reach of children.
• Do not drop the product and avoid bumping.
• Do not use aggressive chemical cleaning agents when cleaning
the product.
Installing the product (image B – D)
1. Attach the desktop clamp A
will be used.
2. Place the bottom of the stand in the desktop clamp A
3. Loosen the adjustment knob A
4. Screw the shock mount A
5. Screw the microphone A
6. Attach the pop filter A
7. Plug one end of the USB-B – USB-A cable A
port A
6
.
8. Plug the other end of the USB-B – USB-A cable A
port of your device.
Set the product as the default microphone for
your device
For macOS:
1. Navigate to System Preferences.
2. Select Sound.
3. Select the Input tab.
4. Select the product GSMIC410BK from the list.
For Windows 10:
1. Right click on the speaker icon on your Windows taskbar.
2. Select Sounds.
4
1
to the surface where the product
w
to adjust the stand.
2
on the top of the stand.
in the shock mount A
4
2
7
to the standA
q
.
8
into the USB-B
8
.
1
.
into a USB
