Maytag Neptune Guía De Uso Y Cuidado página 7

:SING THE CONTROLS
Step Select Options
Wrinkle Prevent - Provides approximately 95 minutes of
intermittent tumbling in unheated air at the end of the cycle
to reduce wrinkling.
End of Cycle Signal -The end of cycle signal is adjustable.
Press the "+" or "-" signal pad to increase or decrease the
volume of the signal.
Wrinkle Prevent
iiiiiiii_
Signal
Cycle Options
Step Start the Dryer
Start/Pause - Close the door and press the Start/Pause
pad to start the dryer. Pressing Off cancels the cycle and
stops the dryer.
To interrupt a running cycle, press the Start/Pause pad again.
Start/Pause
NOTE: If the dryer has not reached the cool down portion
of the cycle,pressing Start/Pause will pause the cycle
indefinitely. If the dryer has moved to cool down, the time will
continue to count down to zero.
Off
After pressing Start/Pause, the display will show the
estimated time remaining in the cycle.
@
Set Drying Tirne
Estimated Time
The indicator lights beside the settings will light when the
selection is made.
The Cool Down indicator light will illuminate when the
dryer moves into the cool-down portion of the cycle.
If the Wrinlde Prevent option has been selected, the
Wrinlde Prevent light will illuminate to indicate that the
load is dry and the dryer has moved into the wrinlde
prevent portion of the cycle (see Step 4).
Time Dry
Cool Down Wrinkle Prevent
Status
6