Introduction
This user manual should accompany the product. The
instructions must also be included in the technical
documentation for the complete machine.
Designated use
The product is designed for picking up free
vertically-hanging loads.
Installation requirements
The work area for the link should be sufficient to be
able to manage freely-hanging vertical loads. The link
must not come into contact with the end stop in the
crane tip.
Avoid operating the rotator fully to the stop point of
the link.
Max swing angle ± 90° between the rotator and link.
Max. axial load: see technical data.
Maintenance
In the case of leakage, abnormal play or other
operational malfunctions, the product must be
serviced immediately by fully trained personnel. This
will eliminate the risk of any additional damage to
components.
Any defective parts shall be replaced with original
spare parts from Indexator.
1101 898 en-GB 2011-03-29 14:20
1
