Idiomas disponibles
Idiomas disponibles
2. Introduction
LFP5120WH series lithium iron phosphate battery is a new energy storage product,
which can provide reliable power support for several equipment and systems.
The LFP5120WH series has a built-in BMS battery management system, which can
manage and monitor battery voltage, current, temperature and other information.
2.1 Product features
- Built-in soft start function, when the inverter needs to start from the battery, it can reduce
the current impact.
- Double active protection at BMS level.
- Automatically set the address when multiple groups are connected.
- Support wake-up via 5~12V signal of RJ45 port.
- Support the host controller to upgrade the battery module through CAN or RS485
communication.
- Enable 95% depth of discharge, which can be used for inverters operating in full
compliance with its protocol.
- The module is non-toxic, non-polluting and environmentally friendly.
- The cathode material is lithium iron phosphate, which has good safety performance and
long life cycle.
- The battery management system (BMS) has protection functions such as over-
discharge, over-charge, over-current, high and low temperature, etc.
- The system can automatically manage the charging and discharging status and balance
the voltage of each cell.
- Flexible configuration, multiple battery modules can be connected in parallel to expand
capacity and power.
- Adopt self-cooling method to quickly reduce the overall noise of the system.
- The model has less self-discharge and can be put on the shelf for up to 6 months without
charging. There is no memory effect, and the shallow charge and discharge performance
is excellent.
- Small size, light weight, easy installation and maintenance.
2.2 Data sheet
Parameter
Nominal voltage
Discharge voltage
Charging voltage
Recommended charging
Max. charging current
Recommended discharging
current
Max. discharging current
Communication
Depth of discharge
Working temperature
The self temperature
Protection degree
IP degree
Humidity
Elevation
Certificates
Design life cycle
Cycles
Data sheet
12.8V
25.6V
10.8-14.6V
21.6-29.2V
14.6V
29.2V
0.5C
0.5C
RS485/RS232/CAN
95%
0°~50°C charge
-10°~50°C discharge
-20°~60°C discharge
IP54
5~95%(RH)
<4000
CE/UN38.3/MSDS
10+Years (25°C)
>4500 at 25°C
24
51.2V
43.2-58.4V
58.4V
1C
1C
I
