Idiomas disponibles
Idiomas disponibles
USING W-DMX MODE
Transmitters
Pressing the button momentarily will connect to all unconnected receivers in the coverage area.
Pressing the button for more than 3 seconds will disconnect all receivers in the coverage area.
Receivers
Pressing the button for more than 3 seconds will disconnect the device with the transmitter.
NOTE:
The colour of the LED will indicate the group as shown in TABLE 2.
The receiver will not connect with a new transmitter unless it is disconnected first.
TABLE 2
PROTOCO
ACTION
L
White
Red
Red fast flash
W-DMX
Receiver
Green fast flash
Green slow flash
Green
Red
W-DMX
Blue fast flash
Transmitter
Blue slow flash
Blue
Using ELDMX wireless mode
Changing channel group
Press the button to show the current channel group in use and press it again to navigate through the
groups. The colour of the LED will indicate the group, as shown in Table 3
PROTOCO
ACTION
L
DESCRIPTION
No connection
Deleting connection
Connection lost
Connecting to transmitter
Connected by not DMX signal
Connected with DMX signal
Deleting all receivers
Connecting with the receivers
No DMX input
Transmitting ok
DESCRIPTION
10
