cecotec PUMBA 6000 PURRFECT MEAL SMART VISION Manual De Instrucciones página 23

ENGLISH
4. OPERATION
Icons and display operation
Press and hold the microphone icon for 3 seconds to start
recording. When you hear a beep, then you can start recording your
voice (for the first 10 seconds). Press the microphone icon again to
Fig. 2.2 stop recording. When you hear two beeps, the recording has been
Microphone saved successfully.
Delete recording: short press the microphone icon for 2 seconds to
delete the recording.
Check the recordings: press the icon once to play the recording.
Resetting Reset the Wi-Fi by pressing and holding the corresponding icon for
Fig. 2.3 the Wi-Fi 10-30 seconds. When you hear a beep and the LED starts flashing
blue, the appliance is connecting.
Fig. 2.4 Dispensing With the recorded voice, the device will play the recording first
food before dispensing the food.
Installing the app
Download and install the "CECOTEC" app by scanning the following QR code.
This application is available for both operating systems (iOS and Android).
You can also download it by searching for it on Google Play (Android) or App
Store (iOS).
Note: Make sure to enable Bluetooth and Wi-Fi on your phone before
attempting to connect the device.
Logging to the app and linking to the feeder
1. Logging in to the app
Open the "Cecotec" app on your mobile phone and click on "Register" to create an account. If
you already have an account, simply log in.
Note: please note that you can only log in to the app from one associated account, but you can
use it to connect to multiple devices and use it on multiple phones.
2. Adding the feeder to the application
After logging into the application, click on the [+] option in the top right corner to add the
feeder. Then, go to the "Pet Care" part and search for the product "Pumba 6000 Purrfect Meal
44 PUMBA 6000 PURRFECT MEAL SMART VISION
Smart Vision Feeder". Finally, follow the linking steps.
Please note
Make sure your phone is connected to a Wi-Fi network with optimal network speeds.
3. Connecting the appliance to a Wi-Fi network
- When the blue indicator light is lit, press, and hold the Wi-Fi reset icon on the feeder's
touch display until you hear a beep.
- Click on the option "Make sure the indicator flashes rapidly or the warning tone is heard"
and click on "Next".
- Select the Wi-Fi network and enter the password, then click "Next".
- A QR code will be generated on the phone. Use the camera on the feeder to scan the QR
code at a distance of 10-20 cm until you hear a beep.
- Confirm that you have heard the beep in the app.
- Wait for the device to pair with the mobile phone and the app.
4. Once connected, click on the "Done" option to enter the video and control interface of
the feeder
- Click on "Schedule" to set up a meal timetable.
- Then access the meal configuration interface.
5. How to delete the device
- Press and hold the feeder option in the app for 3 seconds to access the device removal
interface.
- The display will show the warning message "Delete device".
Please note
To protect the personal data of all users, a device can only connect to one account. If you want
others to be able to control the feeder from the app, remember to remove the device from your
phone first.
Description of the indicator light
Indicator light status
If it flashes blue
If the blue light remains steady
If the green light remains steady
If it flashes red
On food portions depending on your pet, breed, size, and type of food, it is advisable to follow
the table on the food itself or follow the instructions of a professional.
ENGLISH
Description
Connecting to Wi-Fi
Successfully connected to Wi-Fi
Wi-Fi is disconnected (with fully charged
battery)
Low battery
PUMBA 6000 PURRFECT MEAL SMART VISION 45