Idiomas disponibles
Idiomas disponibles
Description
The BT500 Bale Transporter is designed to load, transport and unload round baled fodder such as silage or hay to stock.
The BT500 is a trailed attachment, attaching to the towing vehicle with a 50mm ball hitch connection with integral overturn safety swivel hitch.
Available with either standard single axle or with the optional twin bogie axle system for rougher ground and heavier bales.
Loading and unloading of the bales is achieved using a ratchet and electric winch system, with the winch drawing power from the towing vehicle
via a dedicated power draw off and connector. Winch actuation is achieved using either the supplied remote controls or hard-wired switch.
These machines should however only be used to perform tasks for which they were designed - use of the machine for any other function may be
both dangerous to persons, and potentially damaging to components. Use of the machine beyond the stated usage may invalidate any
applicable warranty, as well as being potential in breach of applicable safety regulations.
Note: This machine is for off-road use only and is not designed or approved for highway travel
Identification
Each machine is fitted with a serial plate (shown below) which details the
following:
1.
Model
2.
Date of Manufacture (DOM)
3.
Serial Number
4.
Mass
When enquiring regarding spares or additional equipment, ensure you have
this information to hand.
Implement Decals
If your implement does not contain all of the decals shown below, please contact Chapman Machinery for replacement decals before use. Note:
All decals must be present and visible. It is imperative that these are replaced if damaged to prevent potential harm to users.
CAUTION - Read operators
manual before handling this
machine. Observe
instructions and safety rules
when operating.
ENSURE CONTROL EQUIPMENT IS SECURELY ATTACHED TO THE TOWING
WARNING - Entanglement
Hazard. Keep hands away
from moving parts
VEHICLE BEFORE USE
Page 3
English
