Mx Onda MX-AS2048 Manual De Instrucciones página 30

Cleaning the filter
1. The collection container should be emptied and cleaned after each use.
2. To clean the collection container, Hold the vacuum cleaner in a vertical position, with the
intake mouth pointing down.
3. Press the unlocking button and pull the dust container gently out.
4. Empty the container If you like, you may wash it with soap and water and then dry it.
5. Refit the filter into the dust container.
6. If damaged, replace it with a new one.
7. Then refit the collection container and place the cleaner on the wall holder.
8. Wipe the outside of the cleaner with a dry cloth. DO not clean the unit with paint thinner or
chemical solution and this will damage the unit.
Dust container (Dirt/Liquid) Removal:
l. Dirt and liquid in the collection container should be emptied after each use.
2. Hold vacuum cleaner vertically with the air-intake (nozzle end)pointing downward to avoid
spillage.
3. Press the unlocking button in top of the vacuum cleaner and release the collection container.
4. Remove the Filter Bracket from the collection container.
5. Empty, wash ,wipes and dries the interior of the collection container.
Caution!
Clean the filter and the collection container with clear water, do not use soap or other cleaning
agents. It would damage the filter. If the filter or the collection container is damaged, you have to
replace it immediately. You can obtain spare parts through Customer Service.
6