Idiomas disponibles
Idiomas disponibles
POSIBLE SOLUTIONS TO OPERATIONAL PROBLEMS
1. The blades do not rotate, the light or some of them do not turn on.
Check that the quick installation connections have been securely fastened until their final
position. (They may be disconnected at the time of final placement due to the large number of
cables that are handled at the same time)
2. Noises, rubbing, buzzing, cyclical knocks, etc.
Check that the ceiling support has been completely fixed and supported at all points.
Check that the blades have been assembled with the metal washers and that they have
been properly tightened. (It is likely that they will have to be tightened again over time.)
Check there are no loose pieces inside the canopy or in the mobile parts of the fan.
Check that the blades have not been swapped when installing more than one fan. (Each set
of 3 blades are balanced with exact weights to avoid vibrations)
3. It does not obey the remote control.
Check the batteries make contact, are correctly secured or if they have run out.
Check that remote controls have not been swapped when installing more than one fan.
(Each remote control is originally synchronized with its fan).
Re-synchronize the remote control with the fan (see page 15)
16
