Idiomas disponibles
Idiomas disponibles
Diagram D: ON/OFF
HOW TO USE
Please read this entire Safety and Maintenance manual fully before
turning on and using your kettle.
TURN KETTLE ON/OFF
To turn Stagg EKG on, press the menu button OR the dial and wait for
the screen to light up. To turn Stagg EKG off, press the dial and wait for
the screen to turn black.
SET GOAL TEMPERATURE
From the main screen when Stagg EKG is powered on, turn the dial to
change the goal temperature. Turn the dial clockwise to increase the
goal temperature. Turn the dial counterclockwise to decrease the goal
temperature.
Once you arrive at your desired temperature, stop turning the dial.
Stagg EKG will display the set temperature for a moment and then begin
heating to the desired temperature. If the kettle is ever removed and set
back on the base, the kettle will start heating to your goal temperature
right away.
IMPORTANT: If Pre-Boil is enabled, the kettle will first heat to boiling
before cooling down to your goal temperature.
12
HIGH ALTITUDE USE
CAUTION: Water boils at lower temperatures in higher altitudes (see
High Altitude Chart below). If the Set temperature is higher than the
boiling point of water at a given altitude, Stagg EKG will continue to
provide heat to attempt to reach the Goal temperature. This causes
excess energy usage and potential damage to the kettle.
Using the Altitude setting, Stagg EKG will determine the maximum
allowable target temperature based on the user-input altitude to
Dial
mitigate energy waste and risk of kettle damage.
Altitude
150 m
305 m
610 m
1524 m
1829 m
2438 m
3048 m
3658 m
4267 m
HIGH ALTITUDE CHART
Boiling Point Of Water
0 m
100ºC
99.5ºC
99ºC
98ºC
95ºC
94ºC
91.9ºC
89.8ºC
87.6ºC
85.5ºC
13
