Idiomas disponibles
Idiomas disponibles
KICKBACK
SAFETY
FEATURES
_WARNING:
The following
fea-
tures are included on your saw to help
reduce hazard of kickback; however,
such features
will not totally eliminate
this danger. Do not rely only on safety
devices.
Follow all safety rules to help
avoid kickback and other forces which
can result in serious
injury.
• Hand Guard: designed
to reduce the
chance of your left hand contacting
the chain if your hand slips off the
front handlebar.
• Position of front and rear handlebars:
designed
with distance
between
handles
and "in-line" with each other.
The spread and "in-line" position of
the hands provided
by this design
work together to give balance and
resistance
in controlling
the pivot of
the saw back toward the operator
if
kickback
occurs.
• Reduced-Kickback
Guide Bar: de-
signed with a small radius tip which
reduces the size of the kickback
danger zone on the bar tip. This type
bar has been demonstrated
to signif-
icantly reduce the number and seri-
ousness
of kickbacks
when tested in
accordance
with ANSI B175.1.
_"_.&
TSip_uiRaJi_Sr
)
• Low Kickback
Chain has met kick-
back performance
requirements
when tested
on the representative
sample
of these
chain saws
speci-
fied in ANSI B175.1.
Low Kickback Chain
Contoured Depth Gauge
l::_-,_-_-_
Elongated Guard Link
_
Deflects Kickback Force
--\_
_
And Allows Wood To
_,-_
Gradually Ride Into Cutter
SAFETY
NOTICE: Exposure
to vibra-
tions through prolonged
use of hand
tools could cause blood vessel or
nerve damage in the fingers, hands,
and joints of people prone to circula-
tion disorders
or abnormal
swelling.
Prolonged
use in cold weather has
been linked to blood vessel damage in
otherwise
healthy people. If symptoms
occur such as numbness,
pain, loss of
strength, change in skin color or tex-
ture, or loss of feeling in the fingers,
hands, or joints, discontinue
the use of
this tool and seek medical attention.
An anti-vibration
system does not
guarantee
the avoidance
of these
problems.
Users who operate power
tools on a continual
and regular basis
must closely monitor their physical
condition and the condition of this tool.
DOUBLE
INSULATION
CONSTRUCTION
This unit is double insulated to help pro-
tect against electric shock. Double in-
sulation construction consists of two
separate "layers" of electrical insulation
instead of grounding.
Tools and appliances built with this in-
sulation system are not intended to be
grounded. No grounding means is pro-
vided on this unit, nor should a means
of grounding be added to this unit. As a
result, the extension cord used with this
unit can be plugged into any polarized
120 volt electrical outlet.
Safety precautions must be observed
when operating any electrical tool. The
double insulation system only provides
added protection against injury resulting
from an internal electrical insulation
failure.
_1_ WARNING:
All electrical
repairs
to this unit, including
housing,
switch,
motor, etc., must be diagnosed
and re-
paired by qualified service
personnel.
Replacement
parts for a double insu-
lated appliance
must be identical to the
parts they replace. A double insulated
appliance
is marked with the words
"double insulation"
or "double insu-
lated". The symbol []
(square within a
square)
may also be marked on the
appliance.
Failure to have the unit re-
paired by Sears service personnel
can
cause the double insulation
construc-
tion to become
ineffective
and result in
serious
injury.
STANDARDS:
This product is listed by
Underwriters
Laboratories,
Inc. in ac-
cordance with UL Standard
1662 and
ANSI B175.1.
ANSI B175.1-2000
"American
Nation-
al Standard
for Powered Tools - Safe-
ty Requirements".
SAVE THESE INSTRUCTIONS
