Adding Items During A Cycle; Option Selections - Haier DWL2825 Manual Del Usuario

Ocultar thumbs Ver también para DWL2825:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ADDING ITEMS DURING A CYCLE

You can add an item anytime before the main wash starts. Open the door and
check the detergent dispenser If the cover is still closed, you can add items.
To add items
1. Open the door slightly. Wait for the spraying action to stop before opening
the door completely.
2. Open the door. If the detergent dispenser cover is still closed, add the item.
3. Close the door firmly until it latches. The dishwasher resumes the cycle after
about a 10 second pause.

OPTION SELECTIONS

You can customize your cycles by pressing an option. If you change your mind,
press the option again to turn the option off.
Select a different option if desired.
You can change an option anytime before selected option begins. For example,
you can press an unheated drying option anytime before drying begins.
Hi-Temp Wash
Select this option to heat the water during parts of the cycle. Higher water
temperatures helps clean tough soils. Hi-Temp Wash, with the Pots & Pans or
Normal cycles, raises the water temperature in the main wash.
This option adds heat, water and wash time to a cycle.
NOTE: Hi-Temp Wash is an option with the Pots & Pans and Normal cycles.
Always use Hi-Temp Wash if you have hard water.
Sanitize Rinse Option
Select this option to raise the water temperature in the final rinse to approximate-
ly 160 F ( 71°C ). The Sanitize Rinse Option adds heat and time to the cycle.
This high temperature rinse sanitizes your dishes and glassware in accordance
With NSF/ANSI standard 184 for Residential dishwasher. Certified residential
dishwasher are not intended for licensed food establishments.
NOTE: Sanitize Rinse is an option with the Pots & Pans and Normal cycle. Only
these sanitization cycles have been designed to meet the NSF/ANSI
requirements.
21
Tabla de contenido
loading

Tabla de contenido